Outdoor-ready video surveillance
The IP66-and NEMA 4X-rated AXIS Q1604-E offers aluminum and robust casing, sunshield to simplify installation time and costs. It is protected from dust, rain, snow and sun, and can operate in temperatures from -40 °C to 50°C (-40 °F to 122 °F) using High PoE (30 W). The camera does not only function at -40 °C (-40 °F), but it can also power up at that temperature following a power failure. This feature is known as Axis' Arctic Temperature Control. To guarantee heating, multiple heaters are placed in direct contact with the camera and the window.
AXIS Q1604-E offers a dual shell technology, where an internal shell stores heat in cold environments. A fan ventilates the air in hot environments, where the heat is transferred to the outer aluminum chassis for efficient cooling.
Ease of installation
One-cable installation thanks to support for PoE. A sunshield and a wall bracket are included to facilitate the installation. For higher flexibility, three cable gaskets holes are available for an Ethernet cable, a power cable and for an external device connected via the camera’s I/O ports. In addition, the cables are vandal protected and the front window is replaceable. The camera’s focus assistant indicates when the image is in focus by the flashing front LED of the camera. Having performed rough focusing at the lens, the remote back focus capability of the AXIS Q1604-E is conveniently used for fine tuning focus.
Dynamic capture capabilities
The camera's Wide Dynamic Range with dynamic capture uses several images with different exposure times. The advanced image processing results in video with exceptional clarity and sharpness.
AXIS Q1604-E can handle complex environments such as when light comes through a tunnel creating both shadow and bright zones. No part of the image turns out too dark or too bright.
AXIS Q1604-E Network Camera using Wide Dynamic Range with dynamic capture
The AXIS Q1604-E is offering Wide Dynamic Range - dynamic capture (greater than 120 dB) capabilities that are especially beneficial in those environments where backlight or intense contrasts are an issue. WDR enables the capture and display of both bright and dark areas, in a way that there are details in both areas, i.e. bright areas are not saturated, and dark areas are not too dark.
Thông tin liên hệ
Camera |
|
Environment: | Outdoors |
Type: | Fixed box-type camera in an outdoor housing |
Sensor: | 1/3" progressive scan RGB CMOS sensor |
Lens: | Varifocal 2.8-8.0mm (F1.2) lens with 80-34° horizontal view |
Audio: | 2-Way audio using AAC, G.711 and G.726 compression |
Power: | IEEE802.3af Power over Ethernet or IEEE802.3at High Power over Ethernet |
Processor/memory: | ARTPEC-4 processor with 256 MB RAM and 128 MB Flash |
Compatibility: | Compatible with Internet Explorer and Mozilla-based browsers such as Safari, Chrome and Firefox |
Video |
|
Resolution: | Various resolutions between 1280x960 and 160x90 |
Compression: | MJPEG and MPEG-4 |
Frame-rate: | 30fps in all resolutions and compression formats |
Bandwidth control: | Controllable frame rate and bandwidth |
Day/night: | True day/might with switchable infrared-cut filter |
Minimum illumination: | Colour: 0.1 lux, B/W: 0.02 lux (F1.2). Colour: 0.4 lux, B/W: 0.06 lux (F1.2 with dynamic capture on) |
Video overlay: | Text and image |
Imaging: | Compression, colour, brightness, sharpness, contrast, white balance, exposure control, exposure zones, backlight compensation, fine tuning of behaviour at low light and wide dynamic range (up to 120dB) |
Viewing, detection & recording |
|
Privacy masking: | Yes |
Simultaneous users: | Up to 20 |
Alarm detection: | Video motion detection, active tampering alarm, audio detection and Axis Camera Application Platform |
Intelligent video: | Active tampering alarm. Video analytics can be added via the Axis Camera Application platform |
External alarm inputs and outputs: | 1x alarm input, 1x trigger output |
Alarm notifications: | File upload via FTP, HTTP and email; Notification via email, HTTP and TCP; External output activation; Video and audio recording to edge storage and pre-/post-alarm video buffering |
Recording triggers: | Intelligent video, schedule and manual |
On-camera recording: | Recording to SD/SDHC memory cards |
Recording software included: | Axis Camera Station One |
Compatible recording platforms (not included) |
|
Software: | Axis Camera Station, Milestone XProtect, SecuritySpy (for Mac OSX) |
Network Video Recorders: | QNAP |
Hosted services: | SecurityStation |
Connections |
|
Power: | DC mini-jack connection |
Network: | 10/100Mbps RJ-45 Ethernet connection with Power over Ethernet support |
Alarm I/O: | Terminal block for 1x input and 1x output |
Audio: | 2x 3.5mm mini-jack connections |
Other |
|
Dimensions: | 142mm x 162mm x 405mm (HxWxD) |
Weight: | 3.1kg |
Colour: | White |
Warranty: | 3 year manufacturer's warranty |
Mounting methods: | wall-mount bracket included |
Operating temperatures: | PoE: -30 to 50°C. High PoE: -40 to 50°C |
Power consumption: | PoE: 13W (Class 3). High PoE: 25.5W |
Dynamic DNS: | Yes, using Axiscam.net |
Protocols supported: | IPv4/v6, HTTP, HTTPS, QoS Layer 3 DiffServ, FTP, SMTP, Bonjour, UPnP, SNMPv1/v2c/v3(MIB-II), DNS, DynDNS, NTP, RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP and SOCKS |
QoS: | Yes |
Security: | Multi-level user security and HTTPS support |
System integration: | Open API for system integration |
ONVIF compliant: | Yes |